The World Wide Web (abbreviated WWW or the Web)

The World Wide Web (abbreviated WWW or the Web) is an information space where documents and other web resources are identified by Uniform Resource Locators (URLs), interlinked by hypertext links, and can be accessed via the Internet. English scientist Tim Berners-Lee invented the World Wide Web in 1989.

Difference between .com and .in

The extension .in is typically meant for businesses and individuals in India. ... Both .com and .in can be registered by anyone in any part of the world. The majordifference between the two are: .in is a ccTLD (country code top level domain) meaning it is best used for websites targeting indian audience.

Steps to Connect your PC with LAN Internet Connection to Another PC

Steps to Connect your PC with LAN Internet Connection to Another PC

1. At first, you need to go out and buy the straight patch Ethernet LAN cable. ...
2. Connect them to both the computers.
3. Go to “Network and Sharing Center” through the Control Panel.

Difference between straight cable and cross cable

Straight-through Ethernet cables are the most commonly used. Crossover cablesuse two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. ... For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

AMAZON MARKET

                                                           

                                                         

                                                             http://amzn.to/2xVWRHH

This link is served by us. You do not need to download the graphic. Just highlight and copy the HTML code provided below, then paste it into the code for your Web site

http://amzn.to/2xT7dY1

This link is served by us. You do not need to download the graphic. Just highlight and copy the HTML code provided below, then paste it into the code for your Web site

What is difference between rj11 and rj45

The main difference between these two is in where they are actually used.RJ45 jacks are used in networking, where you connect computers or other network elements to each other. RJ11is the cable connector that is being used in telephone sets.

Difference between internet and intranet

2. Intranet can be accessed from Internet but with restrictions. Therefore the Internet is an open, public space, while anintranet is designed to be a private space. An intranet may be accessible from the Internet, but it is protected by a password and accessible only to authorized users.

Steps to Connect your PC with LAN Internet Connection to Another PC

Steps to Connect your PC with LAN Internet Connection to Another PC

1. At first, you need to go out and buy the straight patch Ethernet LAN cable. Buy it here. Make sure that “patch” or “crossover” is written on the cord.
2. Connect them to both the computers.
3. Go to “Network and Sharing Center” through the Control Panel.
4. Select “Network Connection” and right click Local Area Network connection and select “Properties”. 
5. Now select “Internet Protocol Version 4(TCP/IPv4)” and click “Properties”.
6. Now, once you are inside the TCP/IP properties of your computer, click “Use the following IP” and enter 192.168.0.1 as IP address and 255.255.255.0 as subnet mask. Leave the other details blank and click “OK”. 
7. Now go to TCP/IP properties of the second computer and enter the same details except the IP address, which should be 192.168.0.2 and click “OK”.
8. Done. Now the networks are operatable. You might need to restart both the computers in some cases.
9. Now, if you’re looking to SHARE the internet connection between 2 computers, go to Local Area Network properties again and click on the Sharing tab. Select “Enable internet connection sharing”.
10. To share files and folders between the 2 computers, go to the properties of that file/folder and select Sharing tab. Click “Share” to share on the network.

how to configure wifi router

1. Log into the router's web-based management page. ...
2. Configure WAN Connection Type. ...
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.
   

How to setup a network switch and router

Follow these steps, regardless of what the router's included setup guide might say:

1. Connect the router's WAN port to your internet source, such as a DSL or cable modem, using the first network cable. ...
2. Connect one of the router's LAN ports (most routers have four LAN ports) to the computer using the second network cable.

how to connect wifi router to pc

Just follow these steps:

1. Turn off your modem,
2. Unplug the modem's Ethernet cable from the PC,
3. Connect that cable to the WAN or internet port on your new router,
4. Power on your modem (wait for a minute or two),
5. Next power on your router (wait for a minute or two),  

A wireless router

A wireless router is a device that performs the functions of arouter and also includes the functions of a wireless access point. It is used to provide access to the Internet or a private computer network.

To connect the switch console port to a PC,

To connect the switch console port to a PC, use the supplied RJ-45-to-DB-9 adapter cable. Follow these steps to connect the PC or terminal to the switch: Step 1 Using the supplied RJ-45-to-DB-9 adapter cable, insert the RJ-45 connector into the console port on the rear of a switch, as shown in Figure C-1.

USB LAN adapters

A high-speed wireless network card that is used to access a network through a USB port on a computer or laptop. Most wireless USB LAN adapters look like small USB flash drives and usually are based on the 802.11g standard which provides a data rate up to 54-Mbps in a wireless LAN environment.

A Network Interface Card (NIC)

A Network Interface Card (NIC) connects the computer to a network. ... Internally, the NIC, also known as a network adapter, is either an expansion card or built right into the motherboard. Externally, it is a device that plugs into the computer ports.

Networking cables are networking

Networking cables are networking hardware used to connect one network device to other network devices or to connect two or more computers to share printers, scanners etc. ... Electrical connections using twisted pair or co

axial cable are used within a building.